Joined: Oct. 2017
||Posted: 05 Nov. 2017,10:14
Thanks for the replies. Update is I have had the clay pipe P trap and gulley replaced with plastic and they have fed a channel drain into this. Also had cracked rest bend fixed on soil pipe. Slightly annoyed they didn't install the second aco for the rest of the drive, suppose I can always add that in though.
Now, where my downspout and 2x kitchen wastes empty to the gulley I need to sort out how they enter here as some spill behind the back (hence the bit of plastic gutter). Now I noticed that they have fitted it lengthways along the wall whereas a lot of pictures on the internet showed it at 90 degrees to this, is there a correct way? If I rotated it could I use the 2 boss inlets on the sides for the 2 kitchen 40mm waste feeds or is it meant for a gutter downspout? Quite hard to find out what they are meant to be used for.
As you can see water still gathering here, next steps will be to re-pave and then get the patio running the opposite way, too wet for that today though!