Have you checked the main website?
The answers to many questions are there!


Pavingexpert
The Brew Cabin
Paving, Drainage and
Hard-landscaping in
Britain and Ireland

Search Members Help

Welcome Guest [ Log In :: Register ]

ruler

 

[ Track this topic :: Email this topic :: Print this topic ]

reply to topic start new topic
Topic: Sbr advice< Next Oldest | Next Newest >
Janavi
Offline

Apprentice




Group: Members
Posts: 1
Joined: July 2019
Posted: 30 July 2019,20:59 QUOTE

Looking for some advice on SBR please....

I'm laying a sandstone patio next week and intend to seal the underside of the paving. If I apply SBR to the underside of each slab just before laying, that will seal it preventing efflorescence and also increase adhesion, is that right?

Can I/ should I ALSO mix SBR in with the bedding mix to increase its strength?

Cheers,
Jamie
Back to top
Profile Personal Message 
digerjones
Offline

Ganger




Group: Members
Posts: 850
Joined: Jan. 2008
Posted: 30 July 2019,23:36 QUOTE

Mix sbr with cement into slurry to coat the back of slabs just before you lay them. You canput it in bedding layer but not sure if it makes any difference. Make sure you clean any spills of sbr with clean water

--------------
dylan
Back to top
Profile Personal Message 
Tony McC
Offline

Site Agent




Group: Moderator
Posts: 10951
Joined: July 2004
Posted: 31 July 2019,19:25 QUOTE

Using SBR, either as a primer or in the bedding mix, will do precious little about efflorescence. A properly prepared primer slurry (SBR plus cement works adequately) will help minimise the risk of eff, but nothing can guarantee to "prevent" it happening.

The good news is that this is the low season for eff problems. Warner temps and allegedly drier days (it's persisting down outside as I type this!) all help keep it to a minimum, but, even so, there is always a risk it may show up.

Having said all that, SBR most assuredly *will* improve adhesion, but, to be honest, adhesion is not usually a problem with sandstone flags when laid on a moist or wet-mix mortar.


--------------
Site Agent - Pavingexpert
Back to top
Profile Personal Message WEB 
2 replies since 30 July 2019,20:59 < Next Oldest | Next Newest >

[ Track this topic :: Email this topic :: Print this topic ]

 
reply to topic start new topic
Quick Reply: Sbr advice

Do you wish to enable your signature for this post?
Do you wish to enable emoticons for this post?
Track this topic
View All Emoticons
View iB Code


ruler

ruler