Joined: Aug. 2006
||Posted: 07 May 2019,15:27
Hi I'm having to design and build (or buy) a machine to make ABS moulds for pavers such as those sold by Bradstone/Marshalls, etc. 450x450x40 etc.
I know there are suppliers in the UK of the moulds (Harristone, etc) but this is for a new client in SA. I need to see if it is cheaper to buy a machine, and remember there was a guy down Rye way who had one/built them, but can't find or remember any contact details. Any help would be appreciated.
A brief description of the machine is a heating plate over an 3mm ABS sheet, drops onto an aluminium master, sucked on by vacuum, then released and trimmed.